CNC PLASAM MACHINE

plasam cutting machine

PC1325 desktop CNC plasma cutting machine is the representative product of our company. It is mainly designed for cutting small metal sheet and the valid cutting range is 1300-2500mm.

PC1325 desktop CNC plasma cutting machine adopts ballscrew intermediate driver, avoiding the swing of the beam follow-side caused by the bilateral drivers, and both sides use precise linear rail position. The beam is made of rectangle steel pipe, and driven with ballscrew and double liner rails. The whole working speed can reach 15000mm/min, and are suitable for cutting metal sheet of thickness of 0.6-10mm.

When plasma cutting, the steel plates are placed on the material supported shelf, but the level height is very different. In order to guarantee the cutting quality, we need to continuously adjust the relative distance between the cutting gun and the steel plate, therefore we configured it with arc-pressure height adjuster. When plasma cutting, there will be more dust generated, in order to reduce pollution, we installed water tank below the grid shelf of the table, and configured with water input/output values, the dust by cutting are mostly absorbed by the water.

1.      PC1325 desktop CNC plasma cutting machine is specially designed for cutting small thinner metal sheet.

2.      Adopt American HYPERTHERM plasma power, cut better and last longer

3.      Equiped with arc-pressure height adjuster which can automatically adjust the relative distance between the cutting gun and the steel plate.

4.      Machine table has a flume which can reduct cutting dust significantly. 

Specification:

X.Y axis working area: 1300x2500mm

Z axis working area: 200mm

Table size: 1450x2900mm

Max speed: 0-250000mm/min

Max working speed: 20000mm/min

Working delicacy: 0.02mm

Reposition accuracy: 0.05mm

Max feeding height: 200mm

Engraving command: G code*

Software: FASTCAM

Max power consumption: 10KW

Plasma power supply: American HYPERTHERM

Work type: stepper

Driver: stepper or Servo

Net weight: 1000kg

Working Voltage: AC 380V, 50Hz

Manner of receiving data: PCI

Running circumstance temperature: 0-45

Relative hunidity: 30%-75%

Work table: flume

Main parameters for HYERTHERM power supply:

A: Carbon steel   B: Stainless steel   C: Aluminium

Classification	Type	Cutting Current	Perforate cutting thickness(mm)	Plasma gas/Protection gas
Air plasma	Powermax 1000	20-60	10(A,B,C)	Air(A) Air or N2(B,C)
	Powermax 1250	25-80	10(A,B,C)	Air(A) Air or N2(B,C)
	Powermax 1650	30-100	12(A,B,C)	Air(A) Air or N2(B,C)

CNC PLASAM MACHINE